1. Prepare Your Garment
   Lay your clean garment flat on a smooth, heat-resistant surface.
   
2. Set Your Iron
   Turn your iron on, ensuring there’s no water inside and the steam setting is off. Set the temperature to 300°F or the appropriate setting for your garment's fabric type.
   
3. Position Your Patch
   Place your woven patch (design facing up) on the desired spot on the garment. Cover the patch with a thin cotton cloth to protect it. A clean t-shirt works.
   
4. Heat It Up
   Press the iron onto the covered patch area, applying firm pressure in circular motions for 10–30 seconds. Let the patch cool for a moment.
   
5. Secure the Backside
   Turn the garment inside-out. Place the iron directly on the area behind the patch, or use a thin cloth to prevent scorching. Apply firm pressure with the iron for 10–30 seconds. Allow it to cool.
   
6. Check Your Work
   Inspect the patch to ensure it's fully adhered. If needed, repeat steps 4–5 for a stronger bond.

Pro Tip: A little patience goes a long way! Let the patch cool completely before wearing or washing your garment.